Everyone knows that everything needs maintenance, and the display stand is no exception. We often clean and maintain the display stands to keep them shiny. However, you may not know that some wrong cleaning and maintenance methods, although temporarily making the display stand clean, actually cause potential damage to the display stand, and your display stand will have irreparable problems, but it is counterproductive. . The following WOW will tell you about several problems and avoidance methods in the maintenance of the display stand, and hope to help the consumers.
The rag must be clean
When cleaning and maintaining the display stand, be sure to make sure the rag is clean. After cleaning or wiping off dust, be sure to turn over or replace it with a clean cloth. Don't be lazy and repeatedly use the dirty side, which will only cause the dirt to repeatedly rub on the surface of the commercial furniture, but will damage the bright surface of the display.
Care agent selection
In order to maintain the original brightness of the display stand, there are currently two types of display stand care products, such as display stand care spray wax and cleaning and maintenance agent. The former is mainly used for display frames of various wood, polyester, paint, fireproof rubber sheets, etc., and has two different fresh fragrances of jasmine and lemon. The latter is suitable for all kinds of wood display frames such as wood, glass, synthetic wood or melamine board, especially for display frames with mixed materials. Therefore, if you can use skin care products that have both cleansing and care effects, you can save a lot of valuable time.
Before using the wax and cleaning and maintenance agent, it is best to shake it first, then directly hold the spray can at a 45 degree angle, so that the liquid component in the tank can be completely released without losing pressure. Then gently spray a dry rag at a distance of about 15 cm, so that you can wipe the commercial furniture, it will have a good cleaning and maintenance effect. In addition, after using the rag, remember to wash and dry. For display stands with fabric materials, such as fabric sofas and leisure cushions, you can use the cleaning and cleaning agent for cleaning carpets. When using, first use a vacuum cleaner to remove dust, then spray a small amount of carpet cleaner on a damp cloth.
Paint surface watermark removal
There is often an annoying watermark on the lacquered table that has been placed on the wet teacup. How can I quickly remove them? You can put a clean damp cloth on the watermark on the desktop and then iron it on the iron at a lower temperature. This will evaporate the moisture that penetrates the paint film and make the watermark disappear. However, when using this method, the rag used should not be too thin, and the temperature of the iron cannot be adjusted too high. Otherwise, the watermark on the desktop is gone, but the branding can't be removed anymore.