The material of the bulk goods and the samples are the same, just because the craftsmanship of the samples and bulk goods are different.
Proofing
The proofing is cut on a cutting machine with special paper for samples. The sample will maintain the same size and appearance as the bulk product as much as possible, but due to the different production process, the details will still be different from the bulk product. The cutting machine is suitable for the production of single and small quantities of products, and is not suitable for mass production.
The paper cut by the sample cutter will keep the integrity of the paper as much as possible.
production:
Since the proofing machine is only suitable for the production of a small number of products, a die-cutting machine is necessary for the production of large quantities of products. Make a good template and use a die-cutting machine to produce a large number of molded products in a short period of time (about thousands of sheets per hour).
In summary, draw the conclusion:
1. The material we use is the same as the sample material. Because the proofing process and the production process are different, there is a difference in thickness. Especially the small parts, because of their small size, are almost all squashed by the foam.
2. The proofing paper is relatively dry because it takes a long time to put it, and it feels harder. The glue produced now is not completely dry, and it feels slightly softer, but the hardness is similar.
