We know that the production of display cabinets is largely not a process of turning a drawing into a physical object. This requires the customization of the materials of the display cabinet, the corresponding planning of the production schedule, etc., especially in large-volume displays. In the cabinet production, the required procedures are more complicated. At this time, we need to optimize the overall production process of the display cabinet according to the requirements of different customers.
1. In the process of customizing the panel of the display cabinet, it is necessary to select different panels according to the materials of the products that the customer wants to display. For example, if the products to be displayed are relatively heavy, we need to select the panel. Be sure to use a panel with a good load-bearing effect. If the items to be displayed are corrosive, then we must choose a panel with good corrosion resistance. After the panel selection is completed, find the corresponding manufacturer for customization. In the process of customization, it is necessary to know the date of delivery in advance, and it is convenient to arrange the time for the finished product production.
2. All the design schemes for the display cabinets must be implemented on the drawings. It is not just a verbal negotiation. Only when it is implemented in the writing, can the assembly work be carried out in the post-installation process, for each detail. Control also has a good effect.