Paper shelves are often designed according to customers' products, and different products have different weights and characteristics. Generally, paper display stands are divided into several commonly used types: Floor Display Stand, Hook Display Stand, etc. There are also special Pallet Display Stand, Counter Display Stand and so on. The above are the more commonly used types, each with its own merits, today, we would like to talk about the design principle of the paper shelves.
1. Floor Display Stand
Floor Display Stand is generally divided into floor type and vertical type.
Floor-standing display racks are the most common type, and they can usually be designed according to customer needs. The structure of the display rack in the picture below is also a layered floor display rack, but the tray base design of this display rack is special, it is a trapezoid, and the whole display rack is in red, which is particularly eye-catching no matter which store it is placed in. .
Some people will start to have questions, can the structure of this display stand load-bearing? Our answer is no problem! Because the fixing of each pallet on the display rack is very good. And the targeted product is any product with lighter weight, so the load-bearing range of this display stand will be relatively small.
The display rack in the picture above has a relatively high load-bearing capacity. From the picture, we can see that the tail of each layer of the tray is buckled on the back plate of the display rack, so that the tray can have two stress points. So as to achieve higher load-bearing requirements. If it is necessary to increase the load-bearing capacity, we will also thicken the pad card of the pallet or make it into a two-layer pad card. Moreover, the direction of the pit pattern of our pad card and the tray is different, thus forming a cross force. This is our conventional design method for high load-bearing display stands.
2. Hook Display Stand
Hook Display Stands are generally placed against the wall. Of course, we can also design the position of the hooks according to customer requirements. Each row of hooks can be hung with different products, and the gap between the hooks is designed according to the size of the customer's product.
3. Double-sided hook display rack
The advantage of the double-sided hook display stand is that it can hang many different kinds of products. And the number that can be hung is relatively large. This type of display rack is usually placed on the aisle or in a more conspicuous place, and relatively speaking, the place required to place this type of display rack is slightly larger, because the double-sided hook display rack can allow customers to get the product on both sides.
4.Counter Display Stand
PDQ generally used in cashiers, counters and other places. Because of its small size, PDQ is suitable for smaller products. If the PDQ screen and structure are eye-catching enough, it will attract a lot of customers to buy the product. Because the cash register is the only way for everyone to pay the bill, I believe that most people see promotional information when they are about to pay the bill, which will stimulate the customer's desire to buy. The load-bearing requirements of PDQ are not high, and the structure is relatively simple.
4. Pallet Display Stand
Why do I put the head of the paper pile at the end? Because the cost-effectiveness of the paper stacker is very high.
As the name suggests, Duitou Duitou means that the height of the cargo pile is very high. I believe everyone will have a sense of familiarity when they see Duitou. That's right, this is the killer of shopping malls and supermarkets for promotional activities. On the aisle of the supermarket is a pile of paper, on which piles of goods are stacked. What everyone should be most concerned about is the load-bearing problem of the paper pile head. After testing, this paper stacker can bear 100KG or more.
You may be surprised. Why can a simple pile head withstand such a high weight? In fact, there are knife cards inside Duitou that we can't see. The so-called knife card is a support card made of 7mm thick corrugated paper designed into two pieces of cardboard cross stitching. So a very high load-bearing capacity is achieved.
This model is very novel in appearance and adopts the shape of a car. The structure is also more complicated than the traditional Duotou, and the load-bearing effect is also good. The structure and shape of this product are also between the floor-standing display stand and Duitou.
The introduction to the design principle of the paper shelves is also coming to an end. In fact, the form of the display rack is ever-changing, mainly due to the designer's idea and the customer's request. Therefore, designers can often create different sparks with their clients, resulting in many amazing works. Paper display shelf is also an art, and WOW is the leader of paper shelf.