How To Choose A Display Stand Manufacturer

May 14, 2021

Leave a message

How to choose a display stand manufacturer:

Because the paper display rack has many advantages such as economical and practical, free design, flexible and beautiful colors, high advertising bearing effect, convenient transportation and packaging, and environmental protection, it has been accepted by all walks of life. After more than 10 years of development in the paper display rack industry, many paper display rack manufacturers have emerged across the country. How to find a good paper display rack manufacturer has become a problem faced by many customers.


The following is the experience summarized by WOW display paper display rack for many years, for your reference:

 3

1. There are so many paper display rack manufacturers, why not every one can make a paper display rack? A very important reason is that the structure of the paper display rack is complicated. The structural design is the soul of the paper display rack. The shape is ever-changing. It is a difficult problem to use paper to realize it. In addition, the paper has to achieve load-bearing, so the structural requirements are very high. Therefore, to make a high-quality paper display stand, a good structural designer is necessary. Structural design software is also very important. A good software can do more with less.

 

2. The computerized automatic proofing machine is equipped to improve the efficiency of proofing and at the same time highlight the advantages of structural optimization. It usually only takes 1 to 2 days for us to proof a paper display stand, and only about 3 days for complicated ones. Those who can't deliver samples for a few days mostly don't have a proofing machine. Such factories don't have time to optimize the structure, and the things they produce will not be very good. This can be seen especially when doing piles with complex structures.

4

3. The quality of the structure design directly affects the quality of the display rack produced. Paper is not like wood and iron. The proofing is what it looks like when it is produced. When the paper display stand is proofed, the paper has already been mounted and flattened. Generally, the effect of proofing is very good. Many customers feel very good when they receive the sample, but usually some manufacturers produce it as rubbish. Not only does it fail to achieve the desired effect of the paper display rack, but also affects the company's image. In fact, when designing the structure of the paper display stand, it is necessary to consider the deformation in the production process, and it also depends on the attitude of the manufacturer's boss, because the quality of the material directly affects the deformation and the load-bearing capacity of the shelf. Now a lot of quotes use this material, and the production will steal the material, try to reduce the cost and make a little bit more, in the end, the gain will not be worth the loss. Therefore, I advise the major customers that the price is definitely not the standard for whom you place the order.

 

4. Plant site. The volume of the paper display rack is relatively large, 100 to 200 sets occupies a container, and the required site area is at least 1,000 square meters to make it easier.

 

5. Production equipment. It only needs to be equipped with a 1800mm and a 1200mm die-cutting machine, a pit mounting machine and a glue machine, and a set of equipment for making beer boards. However, the price of laser cutter molds on the market is not high. We Generally, laser knife molds are used because the efficiency of laser knife molds is very high. Generally, we send more than 20 square meters to the knife mold factory, and it takes at least four to five days to complete the use of human hands in only one day. Coupled with the high precision of the laser die, the products made will be better than those made by the proofing machine.

 

6. The arrangement of the production process. The unsuccessful production process of a company directly affects the delivery time.

 

7. As for production, it is very important to have an experienced production manager, because there are many accessories for paper display stands, and the manager is responsible for the arrangement and quality control of each part. If the factory manager lacks experience, the racks made will be completely out of shape, because the cardboard is pressed well and how to press during the glue drying process, and how much is pressed each time is very particular. Someone must do quality control during production. There is one large factory that was the first in the industry to develop the domestic market, and it was also a relatively large one, that is, without quality control, the things it produces now are almost the same as those of inexperienced factories.

 

8. As for a factory that makes paper display racks to equip a printing machine, it is a lie. Generally, it is just sent out for printing. The amount of paper display stands is not large, so it is unrealistic to have a printing press and a cardboard line.