Acrylic, known as "plastic crystal", has a crystal-like transparent appearance, and has undoubtedly become the primary choice for many businesses to display products today. It has good corrosion resistance and impact resistance, but if it is used for a long time without proper maintenance, it may be deformed. So how to effectively avoid the deformation of the acrylic display stand?
1. Try not to get close to the heat source. Acrylic is easily deformed when heated
2. The impact strength can be improved by thermoforming, and it has the function of releasing internal stress.
3. Choose an acrylic sheet with appropriate weight. Don't be too thin or thick. The thinner is easy to be deformed by the weight of the goods, while the thicker is easy to deform and sag due to the weight of the material.
4. To make acrylic display stand with larger bearing area, pay attention to increase its thickness accordingly to avoid deformation due to larger bearing area.
5. Choose elastic rubber gaskets for the acrylic display stand.
6. Choose acrylic sheet with moderate thickness according to actual use. For larger load-bearing area, increase sheet thickness and load-bearing.
7. When processing acrylic sheets, drill elliptical screw holes and lock them with screws to increase its strength and reduce deformation.
8. Rubber gaskets with good elasticity can provide cushioning for the connection between the boards. At the same time, a certain shrinkage and expansion gap should be reserved for the installation and fixation of the acrylic display stand to prevent thermal expansion and contraction from affecting the display stand.
